Join Us Log In to Budmen Account Support Contact

Pre-Print Checklist

USER GUIDE 8

Pre-Print Checklist

Before you start a print on your Budmen Buildini™, check to make sure you have done the following:

Learn something? Share it:

User Guides

1. Buildini™ Anatomy

2. Changing Filament

3. Filament Settings

4. Build Platform Leveling

5. Starting a 3D Print

6. Stop/Pause 3D Print

7. Choosing Slicer Settings

8. Pre-Print Checklist

9. 3D Printing Glossary

10. Finding Things to 3D Print

11. Tuning Z Probe Offset

12. Understanding Shells, Layer Height, and Infill

13. Adjusting Homing Sensitivity

14. Pause Print at Specific Layer

15. Removing a 3D Print

16. Print Platform Replacement

17. 3D Print on Fabric

18. Improving Print Adhesion

19. Printing with Flexible Filaments

20. Stepper Motor Tuning

21. Using Helper Discs

22. Setup Cura for Buildini