Tuning Z-Probe Offset

USER GUIDE 11

Step-by-step guide to tuning the bed-leveling probe offset.

Step 1

NAVIGATE TO PREPARE MENU

While the printer is not printing, go to the Prepare Menu.

Step 2

SELECT BED LEVELING FROM PREPARE MENU

Select Bed Leveling from the Prepare Menu.

Step 3

NAVIGATE TO Z-PROBE OFFSET

Navigate to Z Probe Offset and click the Spin N Select Knob.

Step 4

SET NEW OFFSET VALUE

Adjust the offset value up or down by spinning the Spin N Select Knob. To set the value click the knob.

IMPORTANT NOTE

If the nozzle is consistently too close to the build platform, raise the offset value (ie. from -1.5 to -1.4). If the nozzle is consistently too far from the build platform, lower the offset value (ie. from -1.5 to -1.6). We recommend tuning in increments of 0.1mm and testing between each adjustment.

Step 5

STORE NEW SETTING

Scroll down to Store Settings and click the Spin N Select Knob. When you hear the chime, the setting has been stored.

Step 6

TEST NEW OFFSET VALUE

Start your next print and watch the outline of the first layer. If the layer height is great, you are all set. If the layer height is still too close or too far away, repeat the above steps.